Aiper Scuba X1 Pro Max robotic pool cleanerCordless floor+wall+waterline~$1,700

Aiper

Aiper Scuba X1 Pro Max

Aiper's biggest robot pumps 8,500 gallons an hour, skims the surface for up to 12 hours and claims pools up to 100 feet long. It steers with 360° ultrasonic scanning and surfaces on its own to be collected — which matters, because at 33.1 lb it is the heaviest robot in the catalog.

Approx. price

~$1,700

snapshot, not a live price

Pool fit

~74 ft (floor only)claims ~100 ft

210 min floor-only runtime at 13 sq ft/min — walls not counted

Filtration

No micron figure published

Retrieval

Parks for pickup · 33.1 lb

surfaces or parks at the wall on its own, so it is lifted from the edge

Runtime

210 min, floor only

Cost per swim season

$567

price ÷ warranty years; a floor, not a lifespan

Best for: Long in-ground pools that collect surface debris

Aiper rates the Aiper Scuba X1 Pro Max for 100 ft / 3,230 sq ft. Its published floor-only runtime covers about 2,730 sq ft of pool — a 2:1 pool about 74 ft long — at 13 sq ft a minute. The claim works out to a pool about 100 ft long. How this is worked out.

Specifications

Approx. price
~$1,700
Type
Cordless floor+wall+waterline
Power
Cordless
Cleans
Floor, walls, waterline, surface
Pool fit
~74 ft, floor only
Maker's pool claim
100 ft / 3,230 sq ft
Filter
5 L top-load basket
Weight
33.1 lb
Retrieval
Parks for pickup · 33.1 lb
Navigation
Ultrasonic
Pool types
in-ground
Surfaces
concrete, fiberglass, vinyl
Warranty
3 years

A specification not listed here is one Aiper does not publish for this model. It is left blank rather than estimated or borrowed from a sibling.

Features

  • 8,500 gph suction
  • Surface skimming up to 12 hours
  • OmniSense+ 2.0 ultrasonic scanning
  • Auto surface parking
  • Three-year warranty

What it does well

  • Skims the surface for up to 12 hours, the longest skimming time of any floor robot here
  • 8,500 gph, the highest suction figure Aiper publishes
  • Surfaces for pickup, which the plain X1 does not list
  • Aiper lists stone among its compatible surfaces as well as concrete, fiberglass and vinyl
  • Three years of cover, where the plain X1 gets two

What it gives up

  • 33.1 lb, the heaviest robot in the catalog
  • The 100 ft claim rests on a 210-minute floor runtime and 150 minutes of wall mode
  • Ultra-fine MicroMesh filter is a separate purchase
  • $1,700, more than twice the $800 Scuba X1

The two lists above come from the maker’s own specifications and this site’s arithmetic on them, not from owner reports. Where owner discussion has been read it appears in its own section below, so the two are never mistaken for each other.

What owners say

No owner discussion has been read for the Aiper Scuba X1 Pro Max yet. This section stays empty until there is something real to put in it.

Others in the same part of the catalog

Aiper Scuba V3 Ultra robotic pool cleaner
Aiper~$2,000

Aiper Scuba V3 Ultra

Cordless floor+wall+waterline · 8 h skimming

Pool fit
No runtime published
Filtration
No micron figure published
Retrieval
Parks for pickup · 28.8 lb
  • Dual cameras
  • Skims the surface
  • 3-year warranty

Cleans: Floor, walls, waterline, surface

Aiper Scuba V3 robotic pool cleaner
Aiper~$850

Aiper Scuba V3

Cordless floor+wall+waterline · 180 min, floor + walls

Pool fit
~55 ft
Filtration
No micron figure published
Retrieval
Parks for pickup · 18.2 lb
  • Self-docking
  • AI navigation
  • 18.2 lb

Cleans: Floor, walls, waterline

More from Aiper →

← Back to the catalog